Подшипник PWKR80 2RS IDC/Interprecise Donath GmbH

DZ = (Беговая поверхность сегмента, код X) = опорные ролики хомута, цилиндрический внешний диаметр, формованный сепаратор оконного типа из полиамида, армированного стекловолокном.

B = кулачковые опоры с улучшенным венцом ходового профиля внешней беговой поверхности и утопленным шестигранником на обоих концах шпильки.

PPX=(Segment Seal, Code 2L) And (Segment Running Surface, Code X)=Cam Followers With PPA (NATR Or NATV Design Support Roller With A Polyamide 66 Axial Sliding And Sealing Ring On Both Sides. Improved Crowned Profile Of The Outer Ring Running Surface, KR Design Cam Follower Have The Same Features As NATR Or NATV, Sizes 16 And 19 Have One Slot In The Head Of The Stud As Standard. Sizes ≥ 22 Have A Recessed Hexagon On Both Ends) Features Except For The Outer Ring Running Surface, Which Has A Cylindrical Profile.

PPX=(Segment Seal, Code 2L) And (Segment Running Surface, Code X)=NATR Or NATV Design Support Roller With A Polyamide 66 Axial Sliding And Sealing Ring On Both Sides. Improved Crowned Profile Of The Outer Ring Running Surface, KR Design Cam Follower Have The Same Features As NATR Or NATV, Sizes 16 And 19 Have One Slot In The Head Of The Stud As Standard. Sizes ≥ 22 Have A Recessed Hexagon On Both Ends, Features Except For The Outer Ring Running Surface, Which Has A Cylindrical Profile. A=With Internal Hexagonal Drive And Optimized Profile.

PPX=(Segment Seal, Code 2L) And (Segment Running Surface, Code X)=NATR Or NATV Design Support Roller With A Polyamide 66 Axial Sliding And Sealing Ring On Both Sides. Improved Crowned Profile Of The Outer Ring Running Surface, KR Design Cam Follower Have The Same Features As NATR Or NATV, Sizes 16 And 19 Have One Slot In The Head Of The Stud As Standard. Sizes ≥ 22 Have A Recessed Hexagon On Both Ends, Features Except For The Outer Ring Running Surface, Which Has A Cylindrical Profile. B=Cam Followers With Improved Crowned Running Profile Of The Outside Running Surface And A Recessed Hexagon On Both Ends Of The Stud.

X = цилиндрический (плоский) профиль внешней беговой поверхности.

2RS=Rubber Seals At Each Side Of The Bearing, Temperature Range -30℃/+120℃. A=

2RS=Rubber Seals At Each Side Of The Bearing, Temperature Range -30℃/+120℃. RR=Protected Against Corrosion By Corrotect® Special Coating. XL=X-Life.

2RS=Rubber Seals At Each Side Of The Bearing, Temperature Range -30℃/+120℃. XL=X-Life.

2RS=Rubber Seals At Each Side Of The Bearing, Temperature Range -30℃/+120℃. A=

NMT = Шестигранная гайка.

PP=(Segment Seal, Code 2L)=Lip Seals On Both Sides (P Type - Two Zinc-Plated Sheet Steel Washers With Intermediate NBR Part, Seal Lip Axially Preloaded), Temperature Range -30℃/+100℃.

PP=(Segment Seal, Code 2L)=Lip Seals On Both Sides (P Type - Two Zinc-Plated Sheet Steel Washers With Intermediate NBR Part, Seal Lip Axially Preloaded), Temperature Range -30℃/+100℃. A=

PP=(Segment Seal, Code 2L)=Lip Seals On Both Sides (P Type - Two Zinc-Plated Sheet Steel Washers With Intermediate NBR Part, Seal Lip Axially Preloaded), Temperature Range -30℃/+100℃. A= NMT=Hexagon Nut.

PP=(Segment Seal, Code 2L)=Lip Seals On Both Sides (P Type - Two Zinc-Plated Sheet Steel Washers With Intermediate NBR Part, Seal Lip Axially Preloaded), Temperature Range -30℃/+100℃. B= NMT=Hexagon Nut.

PP=(Segment Seal, Code 2L)=Lip Seals On Both Sides (P Type - Two Zinc-Plated Sheet Steel Washers With Intermediate NBR Part, Seal Lip Axially Preloaded), Temperature Range -30℃/+100℃. A=

PP=(Segment Seal, Code 2L)=Lip Seals On Both Sides (P Type - Two Zinc-Plated Sheet Steel Washers With Intermediate NBR Part, Seal Lip Axially Preloaded), Temperature Range -30℃/+100℃. B=

PP=(Segment Seal, Code 2L)=Lip Seals On Both Sides (P Type - Two Zinc-Plated Sheet Steel Washers With Intermediate NBR Part, Seal Lip Axially Preloaded), Temperature Range -30℃/+100℃. SK=Stud Type Cam Follower, With Hexagonal Socket.

X=(Segment Running Surface, Code X)=Cylindrical Running Surface. PP=(Segment Seal, Code 2L)=Lip Seals On Both Sides (P Type - Two Zinc-Plated Sheet Steel Washers With Intermediate NBR Part, Seal Lip Axially Preloaded), Temperature Range -30℃/+100℃. A=

X=(Segment Running Surface, Code X)=Cylindrical Running Surface. PP=(Segment Seal, Code 2L)=Lip Seals On Both Sides (P Type - Two Zinc-Plated Sheet Steel Washers With Intermediate NBR Part, Seal Lip Axially Preloaded), Temperature Range -30℃/+100℃. A= NMT=Hexagon Nut.

2RS=Rubber Seals At Each Side Of The Bearing, Temperature Range -30℃/+120℃.

X=(Segment Running Surface, Code X)=Cylindrical Running Surface. PP=(Segment Seal, Code 2L)=Lip Seals On Both Sides (P Type - Two Zinc-Plated Sheet Steel Washers With Intermediate NBR Part, Seal Lip Axially Preloaded), Temperature Range -30℃/+100℃. A=

H = То же, что и «SK» = Кулачковый толкатель, с шестигранной головкой.

LL = Синтетические черные резиновые уплотнения, контактного типа, с обеих сторон.

LLH = (PP / 2LS-SKF) = манжетное уплотнение с обеих сторон подшипника. 3A = Смазка Shell Oil Co., Alvania # 3. S =

X = цилиндрический (плоский) профиль внешней беговой поверхности. LLH = (PP / 2LS-SKF) = манжетное уплотнение с обеих сторон подшипника.

X = цилиндрический (плоский) профиль внешней беговой поверхности. LLH = (PP / 2LS-SKF) = манжетное уплотнение с обеих сторон подшипника. 3A = Смазка Shell Oil Co., Alvania # 3 Grease. S =

B=(Same As Suffix SK, No Segment, So Processed In Base Number)=With Hexagon Hole. UU=(Segment Seal, Code 2L)=Lip Seals On Both Sides (P Type - Two Zinc-Plated Sheet Steel Washers With Intermediate NBR Part, Seal Lip Axially Preloaded), Temperature Range -30℃/+100℃. If Letter R Is In The Suffix, Than The Cam Follower Is With Crowned Outer Ring, Otherwise It's A Cylindrical Running Surface (X).

R = с корончатым внешним кольцом.

UU=(Segment Seal, Code 2L)=Lip Seals On Both Sides (P Type - Two Zinc-Plated Sheet Steel Washers With Intermediate NBR Part, Seal Lip Axially Preloaded), Temperature Range -30℃/+100℃. If Letter R Is In The Suffix, Than The Cam Follower Is With Crowned Outer Ring, Otherwise It's A Cylindrical Running Surface (X).

UU=(Segment Seal, Code 2L)=Lip Seals On Both Sides (P Type - Two Zinc-Plated Sheet Steel Washers With Intermediate NBR Part, Seal Lip Axially Preloaded), Temperature Range -30℃/+100℃. If Letter R Is In The Suffix, Than The Cam Follower Is With Crowned Outer Ring, Otherwise It's A Cylindrical Running Surface (X). A=

UU=(Segment Seal, Code 2L)=Lip Seals On Both Sides (P Type - Two Zinc-Plated Sheet Steel Washers With Intermediate NBR Part, Seal Lip Axially Preloaded), Temperature Range -30℃/+100℃. If Letter R Is In The Suffix, Than The Cam Follower Is With Crowned Outer Ring, Otherwise It's A Cylindrical Running Surface (X).

V=Full Complement Type. B=(Same As Suffix SK, No Segment, So Processed In Base Number)=With Hexagon Hole. UU=(Segment Seal, Code 2L)=Lip Seals On Both Sides (P Type - Two Zinc-Plated Sheet Steel Washers With Intermediate NBR Part, Seal Lip Axially Preloaded), Temperature Range -30℃/+100℃. If Letter R Is In The Suffix, Than The Cam Follower Is With Crowned Outer Ring, Otherwise It's A Cylindrical Running Surface (X).

V=Full Complement Type. UU=(Segment Seal, Code 2L)=Lip Seals On Both Sides (P Type - Two Zinc-Plated Sheet Steel Washers With Intermediate NBR Part, Seal Lip Axially Preloaded), Temperature Range -30℃/+100℃. If Letter R Is In The Suffix, Than The Cam Follower Is With Crowned Outer Ring, Otherwise It's A Cylindrical Running Surface (X).

V=Full Complement Type. UU=(Segment Seal, Code 2L)=Lip Seals On Both Sides (P Type - Two Zinc-Plated Sheet Steel Washers With Intermediate NBR Part, Seal Lip Axially Preloaded), Temperature Range -30℃/+100℃. If Letter R Is In The Suffix, Than The Cam Follower Is With Crowned Outer Ring, Otherwise It's A Cylindrical Running Surface (X).

Буква L в префиксе означает, что толкатель кулачка имеет цилиндрическое внешнее кольцо - EE = пластиковые уплотнения с каждой стороны подшипника.

S = (сегментное уплотнение, код 2L) = кулачковый толкатель, Camrol, герметичная версия.

S = (сегментное уплотнение, код 2L) = кулачковый толкатель, Camrol, герметичная версия. B = кулачковый толкатель, Camrol, шестигранное отверстие заменяет прорезь для отвертки на фланцевом конце штока.

S = (сегментное уплотнение, код 2L) = кулачковый толкатель, Camrol, герметичная версия. B = кулачковый толкатель, Camrol, шестигранное отверстие заменяет прорезь для отвертки на фланцевом конце штока. X = (Беговая поверхность сегмента, код X) = Цилиндрическая беговая поверхность.

S = (сегментное уплотнение, код 2L) = кулачковый толкатель, Camrol, герметичная версия. X = (Беговая поверхность сегмента, код X) = Цилиндрическая беговая поверхность.

Стандарт серии MCFD с экранированными уплотнениями.

M=Made Of Stainless Steel. UU=(Segment Seal, Code 2L)=Lip Seals On Both Sides (P Type - Two Zinc-Plated Sheet Steel Washers With Intermediate NBR Part, Seal Lip Axially Preloaded), Temperature Range -30℃/+100℃. AN=

V=Full Complement Type. UU=(Segment Seal, Code 2L)=Lip Seals On Both Sides (P Type - Two Zinc-Plated Sheet Steel Washers With Intermediate NBR Part, Seal Lip Axially Preloaded), Temperature Range -30℃/+100℃. If Letter R Is In The Suffix, Than The Cam Follower Is With Crowned Outer Ring, Otherwise It's A Cylindrical Running Surface (X).N=