Подшипник MCFR19SX McGill

3A = смазка, Shell Oil Co., Alvania # 3 Grease. S =

B = кулачковый толкатель, Camrol, шестигранное отверстие заменяет прорезь для отвертки на фланцевом конце штока.

B=(Same As Suffix SK, No Segment, So Processed In Base Number)=With Hexagon Hole. UU=(Segment Seal, Code 2L)=Lip Seals On Both Sides (P Type - Two Zinc-Plated Sheet Steel Washers With Intermediate NBR Part, Seal Lip Axially Preloaded), Temperature Range -30℃/+100℃. If Letter R Is In The Suffix, Than The Cam Follower Is With Crowned Outer Ring, Otherwise It's A Cylindrical Running Surface (X).

B=(Same As Suffix SK, No Segment, So Processed In Base Number)=With Hexagon Hole. UU=(Segment Seal, Code 2L)=Lip Seals On Both Sides (P Type - Two Zinc-Plated Sheet Steel Washers With Intermediate NBR Part, Seal Lip Axially Preloaded), Temperature Range -30℃/+100℃. If Letter R Is In The Suffix, Than The Cam Follower Is With Crowned Outer Ring, Otherwise It's A Cylindrical Running Surface (X).

C =

C = 2RS = резиновые уплотнения с каждой стороны подшипника.

C = Коронованный. DZ = (Беговая поверхность сегмента, код X) = опорный ролик, цилиндрический внешний диаметр.

DZ = (Беговая поверхность сегмента, код X) = опорные ролики хомута, цилиндрический внешний диаметр, формованный сепаратор оконного типа из полиамида, армированного стекловолокном.

Буква L в префиксе означает, что толкатель кулачка имеет цилиндрическое внешнее кольцо - EE = пластиковые уплотнения с каждой стороны подшипника.

LL = Синтетические черные резиновые уплотнения, контактного типа, с обеих сторон.

LLH = (PP / 2LS-SKF) = манжетное уплотнение с обеих сторон подшипника.

LLH = (PP / 2LS-SKF) = манжетное уплотнение с обеих сторон подшипника. 3A = Смазка Shell Oil Co., Alvania # 3. S =

NMT = Шестигранная гайка.

PP = (сегментное уплотнение, код 2L) = манжетное уплотнение с обеих сторон подшипника.

PP=(Segment Seal, Code 2L)=Lip Seals On Both Sides (P Type - Two Zinc-Plated Sheet Steel Washers With Intermediate NBR Part, Seal Lip Axially Preloaded), Temperature Range -30℃/+100℃. SK=Stud Type Cam Follower, With Hexagonal Socket.

PP=(Segment Seal, Code 2L)=Lip Seals On Both Sides (P Type - Two Zinc-Plated Sheet Steel Washers With Intermediate NBR Part, Seal Lip Axially Preloaded), Temperature Range -30℃/+100℃. A=

PP=(Segment Seal, Code 2L)=Lip Seals On Both Sides (P Type - Two Zinc-Plated Sheet Steel Washers With Intermediate NBR Part, Seal Lip Axially Preloaded), Temperature Range -30℃/+100℃. A= NMT=Hexagon Nut.

PP=(Segment Seal, Code 2L)=Lip Seals On Both Sides (P Type - Two Zinc-Plated Sheet Steel Washers With Intermediate NBR Part, Seal Lip Axially Preloaded), Temperature Range -30℃/+100℃. RR=Protected Against Corrosion By Corrotect® Special Coating. A=

PP=(Segment Seal, Code 2L)=Lip Seals On Both Sides (P Type - Two Zinc-Plated Sheet Steel Washers With Intermediate NBR Part, Seal Lip Axially Preloaded), Temperature Range -30℃/+100℃. SK=Stud Type Cam Follower, With Hexagonal Socket. A=

PP=(Segment Seal, Code 2L)=Lip Seals On Both Sides (P Type - Two Zinc-Plated Sheet Steel Washers With Intermediate NBR Part, Seal Lip Axially Preloaded), Temperature Range -30℃/+100℃. SK=Stud Type Cam Follower, With Hexagonal Socket. A= NMT=Hexagon Nut.

PP = (сегментное уплотнение, код 2L) = манжетное уплотнение с обеих сторон подшипника. VK426 =

PP=(Segment Seal, Code 2L)=Lip Seals On Both Sides (P Type - Two Zinc-Plated Sheet Steel Washers With Intermediate NBR Part, Seal Lip Axially Preloaded), Temperature Range -30℃/+100℃. A=

PP=(Segment Seal, Code 2L)=Lip Seals On Both Sides (P Type - Two Zinc-Plated Sheet Steel Washers With Intermediate NBR Part, Seal Lip Axially Preloaded), Temperature Range -30℃/+100℃. SK=Stud Type Cam Follower, With Hexagonal Socket.

PP=(Segment Seal, Code 2L)=Lip Seals On Both Sides (P Type - Two Zinc-Plated Sheet Steel Washers With Intermediate NBR Part, Seal Lip Axially Preloaded), Temperature Range -30℃/+100℃. SK=Stud Type Cam Follower, With Hexagonal Socket. A=

PPX=(Segment Seal, Code 2L) And (Segment Running Surface, Code X)=Cam Followers With PPA (NATR Or NATV Design Support Roller With A Polyamide 66 Axial Sliding And Sealing Ring On Both Sides. Improved Crowned Profile Of The Outer Ring Running Surface, KR Design Cam Follower Have The Same Features As NATR Or NATV, Sizes 16 And 19 Have One Slot In The Head Of The Stud As Standard. Sizes ≥ 22 Have A Recessed Hexagon On Both Ends) Features Except For The Outer Ring Running Surface, Which Has A Cylindrical Profile.

PPX=(Segment Seal, Code 2L) And (Segment Running Surface, Code X)=NATR Or NATV Design Support Roller With A Polyamide 66 Axial Sliding And Sealing Ring On Both Sides. Improved Crowned Profile Of The Outer Ring Running Surface, KR Design Cam Follower Have The Same Features As NATR Or NATV, Sizes 16 And 19 Have One Slot In The Head Of The Stud As Standard. Sizes ≥ 22 Have A Recessed Hexagon On Both Ends, Features Except For The Outer Ring Running Surface, Which Has A Cylindrical Profile. A=With Internal Hexagonal Drive And Optimized Profile.

R = с корончатым внешним кольцом.

S = (сегментное уплотнение, код 2L) = кулачковый толкатель, Camrol, герметичная версия.

S = (сегментное уплотнение, код 2L) = кулачковый толкатель, Camrol, герметичная версия. B = кулачковый толкатель, Camrol, шестигранное отверстие заменяет прорезь для отвертки на фланцевом конце штока.

S = (сегментное уплотнение, код 2L) = кулачковый толкатель, Camrol, герметичная версия. B = кулачковый толкатель, Camrol, шестигранное отверстие заменяет прорезь для отвертки на фланцевом конце штока. X = (Беговая поверхность сегмента, код X) = Цилиндрическая беговая поверхность.

SK = толкатель кулачка с шестигранной

S = (сегментное уплотнение, код 2L) = кулачковый толкатель, Camrol, герметичная версия. X = (Беговая поверхность сегмента, код X) = Цилиндрическая беговая поверхность.

Буква L в префиксе означает, что кулачковый толкатель имеет цилиндрическое внешнее кольцо.

UU=(Segment Seal, Code 2L)=Lip Seals On Both Sides (P Type - Two Zinc-Plated Sheet Steel Washers With Intermediate NBR Part, Seal Lip Axially Preloaded), Temperature Range -30℃/+100℃. If Letter R Is In The Suffix, Than The Cam Follower Is With Crowned Outer Ring, Otherwise It's A Cylindrical Running Surface (X).

UU=(Segment Seal, Code 2L)=Lip Seals On Both Sides (P Type - Two Zinc-Plated Sheet Steel Washers With Intermediate NBR Part, Seal Lip Axially Preloaded), Temperature Range -30℃/+100℃. If Letter R Is In The Suffix, Than The Cam Follower Is With Crowned Outer Ring, Otherwise It's A Cylindrical Running Surface (X).

V = Тип полного дополнения. B = (То же, что и суффикс SK, без сегмента, поэтому обработано в базовом номере) = с шестигранным отверстием.

V=Full Complement Type. B=(Same As Suffix SK, No Segment, So Processed In Base Number)=With Hexagon Hole. UU=(Segment Seal, Code 2L)=Lip Seals On Both Sides (P Type - Two Zinc-Plated Sheet Steel Washers With Intermediate NBR Part, Seal Lip Axially Preloaded), Temperature Range -30℃/+100℃. If Letter R Is In The Suffix, Than The Cam Follower Is With Crowned Outer Ring, Otherwise It's A Cylindrical Running Surface (X).

V = подшипник без сепаратора с полным комплектом элементов качения. R = с корончатым внешним кольцом.

V=Full Complement Type. UU=(Segment Seal, Code 2L)=Lip Seals On Both Sides (P Type - Two Zinc-Plated Sheet Steel Washers With Intermediate NBR Part, Seal Lip Axially Preloaded), Temperature Range -30℃/+100℃. If Letter R Is In The Suffix, Than The Cam Follower Is With Crowned Outer Ring, Otherwise It's A Cylindrical Running Surface (X).

V=Full Complement Type. UU=(Segment Seal, Code 2L)=Lip Seals On Both Sides (P Type - Two Zinc-Plated Sheet Steel Washers With Intermediate NBR Part, Seal Lip Axially Preloaded), Temperature Range -30℃/+100℃. If Letter R Is In The Suffix, Than The Cam Follower Is With Crowned Outer Ring, Otherwise It's A Cylindrical Running Surface (X).

WB = UU = 2RS1 (SKF) = R =

X =

X = цилиндрический (плоский) профиль внешней беговой поверхности. LL = УПЛОТНЕНИЯ ИЗ СИНТЕТИЧЕСКОЙ ЧЕРНОЙ РЕЗИНЫ, КОНТАКТНОГО ТИПА, НА ОБЕИХ СТОРОНАХ.

X = (Беговая поверхность сегмента, код X) = Цилиндрическая беговая поверхность. SK = кулачковый толкатель с шестигранной головкой.

X=(Segment Running Surface, Code X)=Cylindrical Running Surface. PP=(Segment Seal, Code 2L)=Lip Seals On Both Sides (P Type - Two Zinc-Plated Sheet Steel Washers With Intermediate NBR Part, Seal Lip Axially Preloaded), Temperature Range -30℃/+100℃. A=

X=(Segment Running Surface, Code X)=Cylindrical Running Surface. PP=(Segment Seal, Code 2L)=Lip Seals On Both Sides (P Type - Two Zinc-Plated Sheet Steel Washers With Intermediate NBR Part, Seal Lip Axially Preloaded), Temperature Range -30℃/+100℃. A= NMT=Hexagon Nut.

X=(Segment Running Surface, Code X)=Cylindrical Running Surface. PP=(Segment Seal, Code 2L)=Lip Seals On Both Sides (P Type - Two Zinc-Plated Sheet Steel Washers With Intermediate NBR Part, Seal Lip Axially Preloaded), Temperature Range -30℃/+100℃. SK=Stud Type Cam Follower, With Hexagonal Socket. A=