Подшипник KRVE22PP NBS

B=Internal Design Modification, Can Be Used As Standard. 2RS=Rubber Seals At Each Side Of The Bearing, Temperature Range -30℃/+120℃.

B = Модификация внутренней конструкции, может использоваться как стандарт. NIP = VD / MON =

B = Модификация внутренней конструкции, может использоваться как стандарт. NMT = шестигранная гайка.

C = LL = Синтетические черные резиновые уплотнения, контактного типа, с обеих сторон.

Буква L в префиксе означает, что толкатель кулачка имеет цилиндрическое внешнее кольцо - EE = пластиковые уплотнения с каждой стороны подшипника.

LLH = (PP / 2LS-SKF) = манжетное уплотнение с обеих сторон подшипника. E = Требуется эксцентриковый (регулируемый) тип.

PP = (сегментное уплотнение, код 2L) = манжетное уплотнение с обеих сторон подшипника.

PP=(Segment Seal, Code 2L)=Lip Seals On Both Sides (P Type - Two Zinc-Plated Sheet Steel Washers With Intermediate NBR Part, Seal Lip Axially Preloaded), Temperature Range -30℃/+100℃. A=

PP=(Segment Seal, Code 2L)=Lip Seals On Both Sides (P Type - Two Zinc-Plated Sheet Steel Washers With Intermediate NBR Part, Seal Lip Axially Preloaded), Temperature Range -30℃/+100℃. A= NMT=Hexagon Nut.

PPA=(Segment Seal, Code 2L)=NATR Or NATV Design Support Roller With A Polyamide 66 Axial Sliding And Sealing Ring On Both Sides. Improved Crowned Profile Of The Outer Ring Running Surface, KR Design Cam Follower Have The Same Features As NATR Or NATV, Sizes 16 And 19 Have One Slot In The Head Of The Stud As Standard. Sizes ≥ 22 Have A Recessed Hexagon On Both Ends.

PP=(Segment Seal, Code 2L)=Lip Seals On Both Sides (P Type - Two Zinc-Plated Sheet Steel Washers With Intermediate NBR Part, Seal Lip Axially Preloaded), Temperature Range -30℃/+100℃. X=(Segment Running Surface, Code X)=Cylindrical Running Surface.

S = кулачковый толкатель, Camrol, герметичная версия (McGill). E = эксцентричный.

SK = кулачковый толкатель с шестигранной головкой.

Буква L в префиксе означает, что кулачковый толкатель имеет цилиндрическое внешнее кольцо.

UU=(Segment Seal, Code 2L)=Lip Seals On Both Sides (P Type - Two Zinc-Plated Sheet Steel Washers With Intermediate NBR Part, Seal Lip Axially Preloaded), Temperature Range -30℃/+100℃. If Letter R Is In The Suffix, Than The Cam Follower Is With Crowned Outer Ring, Otherwise It's A Cylindrical Running Surface (X).

UU=(Segment Seal, Code 2L)=Lip Seals On Both Sides (P Type - Two Zinc-Plated Sheet Steel Washers With Intermediate NBR Part, Seal Lip Axially Preloaded), Temperature Range -30℃/+100℃. If Letter R Is In The Suffix, Than The Cam Follower Is With Crowned Outer Ring, Otherwise It's A Cylindrical Running Surface (X).

UU=(Segment Seal, Code 2L)=Lip Seals On Both Sides (P Type - Two Zinc-Plated Sheet Steel Washers With Intermediate NBR Part, Seal Lip Axially Preloaded), Temperature Range -30℃/+100℃. If Letter R Is In The Suffix, Than The Cam Follower Is With Crowned Outer Ring, Otherwise It's A Cylindrical Running Surface (X). M=

V=Full Complement Type. UU=(Segment Seal, Code 2L)=Lip Seals On Both Sides (P Type - Two Zinc-Plated Sheet Steel Washers With Intermediate NBR Part, Seal Lip Axially Preloaded), Temperature Range -30℃/+100℃. If Letter R Is In The Suffix, Than The Cam Follower Is With Crowned Outer Ring, Otherwise It's A Cylindrical Running Surface (X). M=

X = (Беговая поверхность сегмента, код X) = Цилиндрическая беговая поверхность.